Item # USD-15000-32' 6", Underhung Single Girder Two Motor Driven Cranes On American Crane & Hoist Corp.

Add 2 1/2" to B & C dimensions when rubber end truck bumpers are provided.
Girder sizes with letter "C" indicate beams which are channel capped for additional stability.
S series bridge girders have 9°-30' tapered tread lower flange requiring tapered tread or crowned tread trolley wheels. "W" series bridge girders have flat tread lower flange requiring flat tread or crowned tread trolley wheels.
F dimension is measured from bottom of bridge girder up to underside of outrigger;- check hoist and trolley dimensions to insure proper clearance.

Unit of Measure

Model	N/A Model USD Motorized Cranes
Capacity	N/A 7 1/2 Tons
Span	N/A 32'-6"
Wheel Base	N/A 5'-0"
Girder Size	N/A S20 x 65.4C
Wheel Diameter	N/A 8 1/2 inches
Wheel Load (per pair)	N/A 9670 lbs.
Dimension H1	N/A 21 inches
Dimension B	N/A 3'-4"
Dimension C	N/A 3'-3"
Dimension D	N/A 8 inches
Crane Weight	N/A 4665 lbs.
Dimension H2	N/A 12 inches
Dimension E	N/A 11 inches
Min. Runway Rail	N/A S12 x 31.8
Max. Runway Rail	N/A S18 x 54.7
Type	N/A Top Running Underhung Single Girder
Service	N/A
Usage	N/A Extreme Conditions Indoor Use Outdoor Use
Crane	N/A Hand Geared Motor Driven Push Type
Trolley	N/A Hand Geared Motor Driven Push Type
Hoist Headroom	N/A Hand Chain Low Headroom Standard Headroom
Electric	N/A &nbps;
	N/A Runway Collectors
Bridge Conductors	N/A Bare Copper Wire Safety Enclosed

Model