- Add 2 1/2" to B & C dimensions when rubber end truck bumpers are provided.
- Girder sizes with letter "C" indicate beams which are channel capped for additional stability.
- S series bridge girders have 9°-30' tapered tread lower flange requiring tapered tread or crowned tread trolley wheels. "W" series bridge girders have flat tread lower flange requiring flat tread or crowned tread trolley wheels.
- F dimension is measured from bottom of bridge girder up to underside of outrigger;- check hoist more
- Add 2 1/2" to B & C dimensions when rubber end truck bumpers are provided.
- Girder sizes with letter "C" indicate beams which are channel capped for additional stability.
- S series bridge girders have 9°-30' tapered tread lower flange requiring tapered tread or crowned tread trolley wheels. "W" series bridge girders have flat tread lower flange requiring flat tread or crowned tread trolley wheels.
- F dimension is measured from bottom of bridge girder up to underside of outrigger;- check hoist and trolley dimensions to insure proper clearance.
Unit of Measure
Model |
N/A Model USD Motorized Cranes |
Capacity |
N/A 3 Tons |
Span |
N/A 45'-0" |
Wheel Base |
N/A 7'-6" |
Girder Size |
N/A S20 x 65.4 |
Wheel Diameter |
N/A 6 1/2 inches |
Wheel Load (per pair) |
N/A 4950 lbs. |
Dimension H1 |
N/A 21 inches |
Dimension B |
N/A 4'-5" |
Dimension C |
N/A 4'-3" |
Dimension D |
N/A 10 inches |
Crane Weight |
N/A 6093 lbs. |
Dimension H2 |
N/A 10 inches |
Outrigger |
N/A Structural |
Dimension E |
N/A 27 inches |
Dimension F |
N/A 8 inches |
Min. Runway Rail |
N/A S8 x 18.4 |
Max. Runway Rail |
N/A S12 x 31.8 |
Type |
N/A Top Running Underhung Single Girder |
Service |
N/A |
Usage |
N/A Extreme Conditions Indoor Use Outdoor Use |
Crane |
N/A Hand Geared Motor Driven Push Type |
Trolley |
N/A Hand Geared Motor Driven Push Type |
Hoist Headroom |
N/A Hand Chain Low Headroom Standard Headroom |
Electric |
N/A &nbps; |
|
|
N/A Runway Collectors |
Bridge Conductors |
N/A Bare Copper Wire Safety Enclosed |
