Four-Wheel Monorail Trolley No. A-189 consists of two trolleys No. A-188 coupled by a malleable load bar. It is a sturdy, free-running ball bearing trolley. It can be used in the ordinary way as a single unit, or for carrying racks or special carriers.
Where the application is for light loads and requires a great many trolleys, the great carrying strength of the Monorail rail section will permit a wider spacing of hangers and the covering of longer spans. In most cases this will eliminatemore special supporting superstructure, bringing the cost of both equipment and installation down to a point where, for even very light service, the investment is justified. less
Where the application is for light loads and requires a great many trolleys, the great carrying strength of the Monorail rail section will permit a wider spacing of hangers and the covering of longer spans. In most cases this will eliminatemore special supporting superstructure, bringing the cost of both equipment and installation down to a point where, for even very light service, the investment is justified. less
Unit of Measure
Specifications
Manufacturer |
N/A United States Monorail |
Capacity |
N/A 500 lb |
Wheels |
N/A Drop Forged Steel |
Wheel Yokes |
N/A Malleable Iron |
Wheel Bearings |
N/A Self-Contained Ball |
Axles |
N/A Machined Steel |
Load Bar |
N/A US-155 Malleable Iron |
Load Support |
N/A Forged Load Hook or Eye |
Lubrication |
N/A Through Axle with Pressure Fitting |
Finish |
N/A Focal Orange |
Additional Information
Additional Information |
N/A
The drop forged steel wheels are mounted on self-contained ball bearings. The wheels are carried in a malleable iron yoke. While the two-wheel trolley can be used in single units, it is especially recommended for use in pairs, attached to carrying bars, special racks, or for powder-operated chain-driven installations where any number of trolleys can be connected. Not recommended for use with hoists. |
