All Categories > Bridge/Overhead Cranes > Overhead Crane Components > Under Running End Truck Kits > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Under Running End Truck Kits

Check up to five results to perform an action.


Dimension N, Dimension P, Dimension Q & Dimension V are for minimum size runway beams. For operation on larger size runways, dimensions N-V-P must be increased by 1/2 the runway beam flange width increase and dimension Q decreased by the same amount.



   
  Results 1 - 13 of 13 1 

Item #

Capacity

Wheel Load (per pair)

Wheel Base

Dimension A

Dimension B

Gear Ratio

USC-2-6D 2 Tons 4500 lbs. 6'-0" 5 inches 3'-8" 1.79:1
USC-3-5C 3 Tons 5500 lbs. 5'-0" 5 inches 3'-2" 1.79:1
USC-3-6C 3 Tons 5500 lbs. 6'-0" 5 inches 3'-8" 1.79:1
USC-3-7 1/2C 3 Tons 5500 lbs. 7'-6" 5 inches 4'-5" 1.79:1
USC-3-6D 3 Tons 6500 lbs. 6'-0" 6 1/2 inches 3'-8" 1.82:1
USC-3-7 1/2D 3 Tons 6500 lbs. 7'-6" 6 1/2 inches 4'-5" 1.82:1
USC-3-8 1/2D 3 Tons 6500 lbs. 8'-6" 6 1/2 inches 4'-11" 1.82:1
USC-5-5C 5 Tons 8000 lbs. 5'-0" 6 1/2 inches 3'-2" 1.82:1
USC-5-6C 5 Tons 8000 lbs. 6'-0" 6 1/2 inches 3'-8" 1.82:1
USC-5-7 1/2C 5 Tons 8000 lbs. 7'-6" 6 1/2 inches 4'-5" 1.82:1
USC-5-6D 5 Tons 10000 lbs. 6'-0" 8 1/2 inches 3'-10" 2.29:1
USC-5-7 1/2D 5 Tons 10000 lbs. 7'-6" 8 1/2 inches 4'-7" 2.29:1
USC-5-8 1/2D 5 Tons 10000 lbs. 8'-6" 8 1/2 inches 5'-1" 2.29:1
  Results 1 - 13 of 13 1